Latest News

How to replace the staples for the 100 sheet stapler on the FS-526 multi-position finisher

Remove the staple unit from the finisher by lifting the blue handle and pulling towards you.

Next squeeze the tabs marked push.

The top will then pivot up and you can remove the white inner cartridge.

Next insert the new cartridge with the arrows facing down and with the tape still around the staples.

Next pull out the tape and close the lid.

Then re-fit the staple unit to the finisher.

Should you require assistance or need to re-order staples please contact Elmdale Maintenance on 01189821444

PaperCut have just released version 15, it has a slightly different look with a new logo. 

The major new feature seems to be the new Site Server function, this allows large organisations who have a main print server say in their London office who have their other offices print servers set up as secondary servers more control. As the new site server replaces the secondary server and gives continuity of print services during unexpected network dropouts.

Please see the video from PaperCut  showing installation and set up of a site server.

The other major feature is that users of PaperCut  NG  on windows can now upgrade to PaperCut MF easily by basically installing the PaperCut MF over the top of  PaperCut NG and utilising the existing database.

Learn more about transitioning from PaperCut NG to MF call Elmdale Maintenance on 01189821444

How to Set Up A Receive Connector In Exchange for use with an Olivetti MFD

1^st open the Exchange Management console on the server.

Go to Hub Transport on the server configuration tree.

Right click in the window labelled Receive Connectors and select New Receive Connector

Next give the receive connector a name and select internal from the list.

Next click on Add, then input the I.P. address of the MFD and click OK then Next, if there is already an I.P. range in the list delete it first.

Next click New to set up the new connector.

Then click Finish.

Next right click on the newly set up receive connector and select properties, then go to Permission Groups, make sure that Anonymous users is ticked.

Next go to the Authentication tab and make sure TLS is checked.

Next go to the Network tab and check that the settings match the image below, the I.P. address should be the one of your MFD not the one in the image.

Next click Apply to save the settings if you have had to make any changes.

Next enter the I.P. address of the email server on the MFD, select Start TLS and enter an email address for the machine in the field Device Email Address, you don’t need to enter any info in the authentication settings as we have set the receive connector to accept Anonymous connections.

If you need more info on how to set up scan to email on your machine then see this blog post.

If you need any more help or you need us to set it up for you then contact Elmdale Maintenance Ltd on 0118 982 1444

Overview of setting PaperCut up to email reports – for more info on PaperCut & PaperCutMF then contact Elmdale Maintenance on 01189821444

YouTube Video

How to install and configure PaperCut on a windows server – for more info or to arrange a trial on PaperCut or PaperCutMF then contact Elmdale Maintenance on 01189821444

Youtube Video

Please find below a quick walk through of setting up scanning on an Olivetti colour MFD such as an MF250 though to the latest range of colour MFD’s. The screen may looking slightly different on the different ranges but the information required is the same.

You will need to login as an Administrator through the web terminal of the machine, this can be achieved by putting the IP address of the machine in the address bar of your web browser.

Next log out as a public user.

Then select log in as an administrator, the password is 12345678

Once you have logged in then go to Network, Email Setting, Email TX (SMTP)

Next enter your email server details, make sure to enter an email address for the machine to use. Enter any authentication details to allow it to connect to your email server, this might not be needed, if it won’t connect try turning this off.

You may also need to enter an email address for the Administrator before the machine will work as well. This can be done by going to the maintenance tab on the web interface (still in the admin screen) see below.

Once all this information has been entered then log out of the Admin screen, it is important to do this as the machine will be locked until you have logged out and the users won’t be able to use it.

Next set up some email addresses in your address book, you can do this from the web page as well but you don’t have to be logged in as the Admin. If you go to Store Address, New Registration

Select Email, OK

Fill in the details and select OK.

Once you have finished adding entries to the address book you can now go and test to see if it works.

If you have any problems you can check in the Job History, on newer machines you should have an error code which will help you fault find, see below.

Should you need any help with setting this up or any other enquiry then call Elmdale Maintenance Ltd on 0118 982 1444 for assistance.

If you looking to set up scan to folder then you might want to read this post.

HP Printer Repairs Newbury & Berkshire | 01189821445

Elmdale Maintenance Ltd – Experienced Technicians from a company that’s been established for over 28 years. We cover the berkshire, hampshire, oxford, surrey area. Call Out charge is £85.00 + Vat that includes the 1st hours labour.

We also sell photocopiers/ MFDs & printers Call 0118 982 1444

Original Video : http://youtu.be/-fdsj5Xtt2k

PhotoCopier Service & Repairs Newbury | 01189821445

Elmdale Maintenance Ltd – Experienced Technicians from a company that’s been established for over 28 years. We cover the berkshire, hampshire, oxford, surrey area.

We also sell photocopiers/ MFDs Call 01189821444

Video Original Link = http://youtu.be/J8_wKQLoRDQ

New style Papercut embedded software, this is only available on the Olivetti, Develop & Konica Minolta colour MFDs running i-Option. If the machine doesn’t have the i-Option installed then you get the old interface.

This is relevant to Olivetti MF222plus, MF282Plus, MF362Plus, MF452Plus, MF552Plus, MF652Plus & MF752Plus. Please contact Elmdale Maintenance to find out more about Papercut and how it can help your organisation.

Tel: 0118 982 1444 for all sales enquiries

Setting up scanning to a folder is quite a straight forward process on an Olivetti MF222Plus.

First thing you need to do is create a folder on your computer or server. Then share it, the easiest way to share a folder in windows is to right click on the folder then select properties.

Next select sharing and go to  advanced sharing (1) then check the box to share the folder (2) you can change the share name if need be, next set the permissions of the folder you are sharing (3)

Set the folder permissions to specific people or set to everyone full control, this allows the machine to deliver the scanned doc in to the folder. If it isn’t shared then the machine can not scan back to the computer.

The next thing you will need to do is get the hostname of the computer you are scanning back to, this is quite straight forward to do, you can obtain it by first holding down the windows key on your keyboard then hitting the R on your keyboard.

This will bring up the run box, next type cmd and click ok to bring up the windows command prompt. Then type hostname in the command prompt window and press enter on your keyboard, you will then see the hostname of your computer. As you can see in the example below it is PC9.

Once we have the hostname and a folder set up the next step is to open up the web interface of the Olivetti MF222Plus. This is done by typing http://IPADDRESSOFTHEMACHINE (i.e. 192.168.1.150) in the address bar of your web browser.

(You can find out the IP address of your machine either from the port settings on your print driver or by printing out the configuration page at the machine in user settings.)

Next go to the Store Address tab of the MFD’s web page.

Then click on New Registration in the Address Book List.

Next fill in the fields like below,

1. The name that will be displayed on the machines display

2. Check the main box and the area of the address book that it will reside.

3. Check the box for the hostname.

4. Add the hostname (e.g. PC9) that you got from the command prompt, then the share name of the folder you set up, then a valid windows user name and password that has access to the computer you are scanning back to.

5. Then click OK to store the details.

You should get the message below if it has been set up on the machine.

You can set up more scan folders by clicking Continue Registration or just click return or close the web browser.

You should now be able to scan back to your PC or server, if it fails for any reason and you require assistance then contact Elmdale Maintenance on 0118 982 1445.

This process can be used on all Olivetti, Konica Minolta, Develop colour MFD’s such as Bizhub C224e, 284e, 364e, 454e, 554e or Olivetti MF282Plus, MF362Plus, MF452Plus, MF552Plus, MF652, MF752 or Develop Ineo+ 224e, Ineo+ 284e,Ineo+ 364e,Ineo+ 454e,Ineo+ 554e